http://repositorio.jesuita.org.br/handle/UNISINOS/10012 Graduação Sun, 05 Apr 2026 16:22:56 GMT 2026-04-05T16:22:56Z http://repositorio.jesuita.org.br/handle/UNISINOS/13583 Esforços de segunda ordem global de torção em edifícios altos em concreto armado: análise da aplicação do coeficiente de simplificação 𝜸θ Verona, João Paulo The study of the global stability of tall reinforced concrete buildings has been subject of extensive research on the structural desing field, resulting in significant advances in this area. The simplification coefficient 𝛾𝑍, presented by Franco e Vasconcelos (1991), became remarkable, but its limitation to determine only the translational effects of structures led Franco (2003) to introduce another simplified method, this time represented by the simplification coefficient 𝛾𝜃, which has the purpose of assessing the structures’ sensibility to global torsional effects. However, there is limited research on this subject available in the literature of the field, fact that highlights the need of further investigations on the topic. The main objective of the present study is to analyze the accuracy of applying this coefficient to quantify the global second-order effects due to the torsion of the building. The metodology was based on the modeling of four 20- story buildings on the software TQS v24, which were taken from Moser’s (2022) dissertation. In the occasion, the referred author analyzed the influence of geometric and load asymmetries on the torsional effects of the structures, with assistance from the software SAP2000. Initially, the center of torsion of the proposed models was defined by the application of the graphic method, also introduced by Franco (2003). Thereafter, the value of the simplification coefficient 𝛾𝜃 was assessed for each of the horizontal load cases. This assessment enabled its implementation to enhance the global first-order torsional effects, ultimately achieving the total horizontal displacement of the structure. Finally, it was conducted the comparative analysis between the horizontal displacement obtained through the application of the aformentioned process, the values found by Moser (2022) with the assistance of the software SAP2000 and ultimately by the iterative process P-Δ. After the analysis, it was verified that the differences between the calculation methods implemented by the softwares TQS and SAP2000 are so pronounced that they turn the comparative analysis unfeasible, at least when the matter is the horizontal displacements. On the other hand, when compared with the iterative process P-Δ, it was observed that the simultanous application of the simplification coefficients 𝛾𝑍 and 𝛾𝜃 is proven to be effective in certain situations. However, there are some limitations to its use, requiring the adaptation of certain variables to ensure that the results are consistent with reality. Fri, 01 Dec 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13583 2023-12-01T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13281 Doe vidas: uma proposta de aplicação para promover informação, comunicação e disseminação de conhecimento sobre a doação de órgãos Cruz, Jonas Silva da Wed, 21 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13281 2023-06-21T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13280 Escriva: desenvolvimento de um protótipo de aplicativo móvel de gestão de metas e produtividade para escritores Silva, Fernanda Borges Pinto da Mon, 26 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13280 2023-06-26T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13279 Skillbridge: uma proposta de ferramenta gamificada para auxiliar no processo de mentoria Ricardi, Felipe The mentoring process can be aporached on many ways, having as its core a menthor of- fering their experience to the mentee. Studys point out that this process can surface features, such as creativity, and ease the learning process on students that are part of classes with a huge number of people. In the existent applications, we can see that generally there is a specific tar- get scope, being it a group ou people or an area of study. There is also niche where the mentee can hire the mentoring service, being it as a subscription or hiring a single session. A tool that approaches the process without being attached to a specific organization or without the needing to hire someone was not found. The present work aims to make available a platform that makes possible the connection of menthors and mentees, allowing the track of the process and management of achievements obtained by mentoring process. Through works studied, results were found that the usage of gamification concepts aid on incentive to cooperation. Thus, these concepts will be added to the system on the form of goal management, that will be added by the menthor to their mentees, and by sharing achievements that the mentoring process made possible. Therefore, the goal is creating a community amongst the participants of the mentoring process. To put into practice the research findings and understand what the potential users thinks about the current proposal, an interactive prototype was created, based on a small scope of the requirements. The prototype was evaluated by 18 people, scoring averagely 89.38% in the System Usability Scale (SUS). This shows that the prototype has an acceptable experience, being possible to evolve to a final product that approaches the goals of the present work. Thu, 22 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13279 2023-06-22T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13278 Diretrizes de game design para desenvolvimento de jogos digitais acessíveis Mendes, Monique de Aguiar Thu, 08 Dec 2022 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13278 2022-12-08T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13276 Code Path: concepção e desenvolvimento de uma plataforma para o auxílio de novos alunos no aprendizado de programação Menegat, Giovani Tedesco Thu, 08 Dec 2022 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13276 2022-12-08T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13275 Cryptocurrency trading bot assisted by artificial intelligence Souza, Eduardo Remor de Wed, 23 Nov 2022 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13275 2022-11-23T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13274 Práticas da Gestão do Conhecimento no contexto de startups Velleda, Dionísio Guimarães To be competitive in today's knowledge economy, startup companies must effectively use available knowledge to implement their innovation and development strategies. Consequently, it is necessary to identify which knowledge management practices are used by these companies. This study aims to identify the knowledge management practices used in startup companies. For this, qualitative research was conducted having as a source of data, interviews with startup founders. The relationship between the knowledge management practices used and the critical factors for the development of innovation in the context of startups will be discussed. Interviews were conducted with the founders of startups installed in technology incubators. Wed, 30 Nov 2022 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13274 2022-11-30T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13271 TAF - modelo de site de Transparência Ativa Facilitada: o uso de técnicas de UX Design no processo de desenvolvimento de software Mühlbach, Paula Tue, 14 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13271 2021-12-14T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13270 Anamtech: speech-based automatic structuring of medical anamnesis Fraga, Ygor Allan de Thu, 09 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13270 2021-12-09T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13269 Gestão e compartilhamento de conhecimento em uma empresa de software: análise das práticas de gestão de conhecimento em um ambiente de uma equipe remota Moraes, Pablo Rafael de Nowadays, to obtain competitive advantage encompasses many factors. Knowledge management (KM), which treats knowledge as one of the main assets that an organization can have, is an enabler for companies to achieve great results if the KM processes are implemented in an effective manner. With the growth in the globalization mid 2000s and with the arrival of new technologies, the concept of remote work, also known as telework, which for years had been present, was widely spread across companies around the world. In this work, an exploratory research through a survey was conducted around the processes of KM in support teams of a software company located in the south region of Brazil. For confidentiality reasons, the company described in this work is referred to as company “ABC”. The advent of the SARS-CoV 2 pandemic, mostly known as COVID-19, and the imminences brought by the disease turned the attention of many companies to the remote work, making these companies realize that the continuity of their daily operations would be possible thanks to the possibility of remote work. This was particularly noticed for companies that operate in the Information Technology (IT) area. Due to the COVID-19 pandemic and by demand of local authorities, the support teams from the ABC company had to start operating fully remotely and virtually. Therefore, the main objective of the present work is to find an answer to the question “How to foster the creation and sharing of knowledge in teams that work virtually and remotely?”, considering the software support teams of the ABC company. For the study, a bibliographic research was primarily conducted around the theme of KM and knowledge transfer, in which it was elucidated what are the phases and types of knowledge available, the SECI model, which possesses this name due to the phases that compose the model (socialization, externalization, combination, internalization), in addition to the study of the barriers for knowledge sharing in remote teams, knowledge management systems and knowledge articles. This study emphasizes the socialization phase of the SECI model, which was highlighted as the most affected phase by the emergence of remote work among the support teams from the ABC company, also providing other recommendations that were made possible through the applied questionnaire and the analysis of data concerning the creation and maintenance of knowledge articles. Wed, 15 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13269 2021-12-15T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13268 Domain-Driven Design e programação funcional no domínio da interoperabilidade de dados na área da saúde: aplicação de práticas de engenharia de software com o modelo FHIR Schmitt, Gabriel Bohrer Mon, 13 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13268 2021-12-13T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13267 Perfil de metilação do Gene NT5E em amostras de tumores sólidos baseado em ferramentas de inteligência artificial Valandro, Cleiton Felipe Mon, 13 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13267 2021-12-13T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13190 Estudo de caso: uso da piezoeletricidade em pavimentos, mantendo suas características de geração de energia Carvalho, Flávia Renata Prestes Several highways in the country contain a large flow of vehicles. These, with their speed and weight, generate heat and friction on the pavements. Currently, this mechanical energy is wasted. With the aim of converting the vibration energy of vehicles into electrical energy, this work studies the incorporation of piezoelectric materials to make roads more energy efficient. Piezoelectricity is the effect of crystals that, when subjected to external pressure, deform their magnetic field, generating a potential difference that results in electric current. The purpose of this work was to analyze 20mm diameter piezoelectric tablets below the flexible pavement coating layer, through laboratory and field tests. In the laboratory, tests were carried out to evaluate the rigidity and performance of the system under loads of 10Kg, 50Kg, 150Kg, 250Kg and 350Kg, maintaining the characteristics of energy generation and aiming at the durability of the system during the succession of loads. In the field, the differences between the loads of passenger and SUV vehicles were evaluated, as well as the effect of speeds of 10Km/h, 20Km/h and 30Km/h, with the aim of maintaining the supply of energy microgeneration and allowing a considerable energy generation, even under adverse external conditions in which the material was applied. A positive contribution to the mechanical behavior in the laboratory and field was observed in relation to the effect of loads. Confirming previous studies, the greater the application of weights, the greater the effects of the electric current on the system. Thus, in the tests carried out, it was possible to validate the energy generation characteristics and the emissions generated were as expected. Therefore, this work proposes a renewable energy alternative in places with large movement of people and vehicles and the system is favorable for its integrity to be continued in future studies. Mon, 04 Dec 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13190 2023-12-04T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13084 Aplicação da álgebra linear na resolução do jogo Lights Out Nunes, Isaac Canabarro Tue, 04 Jul 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13084 2023-07-04T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13083 Mentalidades matemáticas: um estudo sobre o ensino e aprendizagem da matemática Barth, Carolina Thu, 29 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13083 2023-06-29T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13082 Usando modelos de regressão linear para estimar o peso de uma produção avícola Schoffen, Alexsandro Mon, 03 Jul 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13082 2023-07-03T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13043 A física do olho humano: ensino de distúrbios visuais através da metodologia de Aprendizagem Baseada em Projetos Alano, Letícia Tonolli Wed, 28 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13043 2023-06-28T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13042 Vieses comportamentais e a dinâmica do mercado: imitadores, contrários e grupo de influência Guarnieri, Gabriel Fri, 10 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13042 2021-12-10T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13039 Artrópode mecânico: projeto de mecanismo para movimentação de artrópode mecânico Silveira, Matheus Fabrício da Fri, 10 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13039 2021-12-10T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13038 Desenvolvimento de protótipo de acoplamento complacente para aplicação entre trator e implemento agrícola Gabardo, Guilherme Henrique Tue, 07 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13038 2021-12-07T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13037 Desenvolvimento de procedimento utilizando o método de Rainflow para contagem de ciclos e interação com sofware de CAE para previsão de vida em fadiga Kunzler, Christoph Roberto Tue, 07 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13037 2021-12-07T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13036 Digitalização de um programa de ideias: análise do processo de implantação e resultados Lima, Christian Bastos This paper approaches the analysis of the digitization process of a program of ideas. Performs the mapping of the previous state and after digitization. Describes how the digital program implementation process occurred. Identifies the benefits that have arisen from changes in the process. Check the benefits of digitization for engineering. In addition, it identifies design challenges. Regarding the nature of the research, it was opted for the applied research due to the practical disposition, being exploratory, since it aimed to clarify the process of digitization of the program of ideas. A qualitative analysis of the data was performed, aiming at the description and understanding of the theme studied. The method was defined as a case study in order to explore the theme in its real context, using a single case for an in-depth study. The place chosen for the development of the research was a company in the field of agricultural machinery located in the metropolitan region of Porto Alegre with about 1000 employees. The company was chosen for the case study because it went through a process of digitizing the ideas program in 2020. As an instrument for data collection, semi-structured interviews were used, and interviews guided by a script with open questions were conducted, allowing the interviewee to add different information in order to enrich the research. Regarding data analysis, the content analysis technique was used, performing a pre-analysis, exploration of the material and treatment of the results. As main results, it was highlight the improvement and reduction of the flow of idea capture, the digitization of the program database, the creation of a visual flowchart with real time access and the increase of ideas after the implementation of the digital solution. Thu, 02 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13036 2021-12-02T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13035 Desenvolvimento de dispositivo de ensaio Quick Stop para avaliar a formação do cavaco Oliveira, Alexsander Nunes de Mon, 29 Nov 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13035 2021-11-29T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13034 Projeto e desenvolvimento de um sistema de acionamento, sensoriamento e monitoramento para prótese de mão open source Froehlich, Rafael Ilha Wed, 21 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13034 2023-06-21T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13033 Desenvolvimento de um supervisório para monitoramento e processamento de sinais EMG e ACC Pinheiro, Lucas de Lima Wed, 21 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13033 2023-06-21T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13032 Análise de emendas em cabos condutores para instalações elétricas de baixa tensão Lauer, José Rafael Fri, 23 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13032 2023-06-23T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13031 Impacto do absenteísmo nos indicadores comerciais de uma concessionária de energia elétrica Rocha, Gustavo Viegas da Mon, 19 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13031 2023-06-19T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13030 Detecção de presença de objetos utilizando sensoriamento Wi-Fi com Channel State Information Stein, Felipe Vinícius Thu, 22 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13030 2023-06-22T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13029 Planejamento de manobras para alívios de carga mitigando a violação ou ultrapassagens de demanda contratada nos montantes de uso do sistema de transmissão Soares, Émerson Thu, 22 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13029 2023-06-22T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13028 Estimativa de perdas não técnicas de áreas em vulnerabilidade social e proposição de mitigação com base no marco legal da microgeração e minigeração distribuída Cardoso, André Luiz Martins Mon, 19 Jun 2023 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13028 2023-06-19T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13027 Metodologia para padronização de projeto elétrico e execução de montagem na indústria de veículos de recreação Lambrecht, Douglas Mon, 28 Nov 2022 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13027 2022-11-28T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13026 Análise experimental de um sistema fotovoltaico para atendimento de uma carga específica Rodrigues, Tiago Lucas Kondra Thu, 01 Dec 2022 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13026 2022-12-01T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13025 Estudo de proteção, coordenação e seletividade aplicado em estudo de caso de rede de distribuição de 23 KV particular Pescke, Pedro Henrique Mon, 28 Nov 2022 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13025 2022-11-28T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13024 Modelo de detecção por imagens do ataque da Spodoptera frugiperda em plantações de milho Trombetta, Moacyr Júnior Thu, 01 Dec 2022 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13024 2022-12-01T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13023 Projeto e desenvolvimento de estação meteorológica com RTC e comunicação wi-fi Figueiró, Michael Nunes Fri, 25 Nov 2022 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13023 2022-11-25T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13022 Estudo de coordenação e seletividade das proteções elétricas de uma instalação industrial Ely, Rodrigo Möllerke Thu, 09 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13022 2021-12-09T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13021 Sistema de mitigação de colisões por meio de visão computacional: detecção de aproximação de veículos Silva, Matusallan Corrêa da Fri, 10 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13021 2021-12-10T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13020 Análise de perdas não técnicas em ocupações: quantificação de prejuízo e indentificação de ações adequações/regularizações Santos, Marcio Juarez Sena dos Thu, 09 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13020 2021-12-09T00:00:00Z http://repositorio.jesuita.org.br/handle/UNISINOS/13019 Projeto e desenvolvimento de sistema de acionamento para prótese de mão open source Silva, João Marcos da Fri, 03 Dec 2021 00:00:00 GMT http://repositorio.jesuita.org.br/handle/UNISINOS/13019 2021-12-03T00:00:00Z